Argo Baseboard, 55LT27-6, Baseboard Complete Assembled Enclosure, 6 ft, Aluminum

Argo 55LT27-6 Lo-Trim II Hydronic Baseboard – 6 Ft Section, Galvanized Steel with Aluminum Fins The Argo 55LT27-6 Lo-Trim II is a 6-foot hydronic baseboard radiator section designed for residential and light commercial hot water heating systems. Its low-profile design accommodates modern architectural requirements while delivering consistent linear heat output.Constructed from galvanized steel with a white powder-coated finish, this enclosure houses a fin-tube heating element featuring precision-formed aluminum fins mechanically bonded to a 3/4″ copper tube. This configuration provides high thermal conductivity and efficient room heating.The Lo-Trim II series is designed to be installed along perimeter walls and is compatible with a full range of snap-on accessories including end caps, corners, splices, and brackets—streamlining system layout and assembly.Technical Specifications: Model: 55LT27-6Length: 6 ft nominalTubing: 3/4 in CTS copper (supply and return)Element Type: Copper tube with aluminum finsEnclosure Material: Galvanized steelFinish: Baked white powder coatBTU Output: Approx. 300 BTU/hr per linear foot (dependent on water temp, flow rate, and ΔT)Product Features: Low-Profile Housing – Designed for installations requiring minimal vertical clearance along perimeter wallsCorrosion-Resistant Construction – Galvanized steel and powder-coated finish enhance durability in humid or varied environmentsEfficient Heat Transfer – Fin-tube element supports high-output delivery with quick room response timesSnap-On Components – Compatible with Argo Lo-Trim II accessories for clean transitions at corners, ends, and wall segmentsQuiet Operation – Natural convection minimizes system noise, eliminating the need for mechanical fansInstallation & Application Notes: Suitable for use in residential or multifamily hydronic systems operating at standard pressure and temperature ratingsDesigned for wall-mounted installation via included bracket system or optional accessoriesProper spacing from finished floors and wall coverings must be maintained to ensure airflow and performanceAll joints should be brazed or soldered using best practices for hydronic pipingInstallation must conform to local code requirements and mechanical drawings